11.4.3 Setting CPE specific functions
You can set CPE specific functions in the CPE overview. You can also remotely provision a VLAN configuration of the PC and LAN port. Note that the device retrieves provisioning the first time it boots and does not have a VLAN at that time. Therefore, the VLAN settings will not be active until the device retrieves provisioning from the server. Only after connecting to the network to retrieve the configuration will the device restart in the programmed VLAN IDs.
To set CPE specific functions
1 If applicable, type in the customer you want to set CPE specific functions for in the search bar and click on the customer’s name.
*The Customer details page appears.
2 In the menu click on Contact.
*The Contact environment appears.
3 Click on CPE SETTINGS.
*The CPE overview page appears.
4 Next to the CPE you want to edit, click on .
*The Configure CPE page appears.
Label
Explanation
SIP Proxy
This option allows you to select a proxy for this specific device, which is set in autoprovisioning. You have to restore the device during a factory reset for the new setting to take effect.
Don’t offer second incoming call
This option is specific for a Yealink device.
This option allows you to switch the offer of a second call on or off. An 'in busy' tone will then be heard.
Call waiting alert on 2nd incoming call
This option is specific for a Yealink device.
Select On if you want a beep to be signalled when a second call comes in.
Display missed calls
This option is specific for a Yealink device.
Select On if you want missed calls to be displayed.
Enable VLAN
This option enables or disables the VLAN functionality
Phone VLAN ID
Enter the VLAN ID to be activated on the telephone network port (LAN) here.
PC Port VLAN ID
Enter the VLAN ID to be activated on the PC port.
5 Click on Save.
*Your changes are saved.